Precisely regulating the bullet seating depth and the resulting "jump" to the rifling is widely regarded as fundamental to improved accuracy. A few thousandths of an inch change between the bullet and the rifling can make the difference between just so-so accuracy and real tack-driver performance.
The OAL (overall length) Gauge is universally acclaimed as the most accurate, easy-to-use and reliable method of obtaining that critical relationship.
Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension.
The Cyclone Rotary Tumbler takes brass cleaning to a whole new level. The rotary tumbling action combined with the stainless steel media and liquid cleaning solution gets brass cleaner on the outside than vibratory tumbling methods. The small stainless pins easily slip inside cases and into primer pockets to provide superior cleaning action in these areas.
The Redding Die Wax is the ultimate non-liquid sizing die lube. The LeClear formula is true the the original 1970's formula, and one tin will cover several thousand cases. This wax will make forming cases easier with less chance of dented shoulders.
If you are looking for the ultimate case prep tool to completely prepare trimmed brass before reloading; look no further than the RCBS Brass Boss. The Brass Boss was designed from the ground up to be the ultimate case prep station.
Winchester red anodized aluminium loading blocks are made with precision for reloaders who want their equipment at a high quality.
The red reloading block is for small calibres like 223Rem, 222Rem and 204 etc. 50 11MM holes are drilled into the blocks.