Stock Out
The RCBS Pow'r Pull Impact Bullet Puller features a solid one piece body and innovative 3-jaw chuck that firmly grips the case rim.
Simply tap it on a solid surface as you would a hammer, and the powder and bullet drop into the main chamber for re-use. A soft cushion prevents any damage to bullet.
Works with most centre-fire cartridges from the 5.7x28mm FN and 22 Hornet up through the Winchester Short Magnum and Remington Ultra Magnum family of cartridges.
Stock Out
Clean dirt and powder residue from inside necks and simultaneously lubricate for expansion with the RCBS® case neck brushes. The no-roll handle design accepts all three nylon bristle brushes: small brush for 22 to 25 caliber, medium brush for 270 to 30 caliber, and large brush for 35 to 45 caliber.
RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die.
Sale
The new RangeMaster 2000 high-performance electronic scale handles up to 2,000 grains with +/-0.1 grain accuracy to precisely measure powder, bullets, cases or loaded cartridges. It provides right- or left-handed operation and a wealth of big-time features. Compact size and the ability to operate on AC or DC power, make it perfect for use on the bench or at the range. The touchscreen LCD is easy to read and operate, and provides an auto shut off function to save the battery. The scale is fast and easy to calibrate with the two included calibration/check weights. This scale is designed for...
Stock Out
Clean dirt and powder residue from inside necks and simultaneously lubricate for expansion with the RCBS case neck brushes.
Designed for use with the RCBS ergonomic handle.
The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions.
Stock Out
The RCBS Case Neck Brush is designed to help reloaders clean dirt and powder residue from the inside of case necks while at the same time applying lubrication to ease the amount of force required during case neck expansion during the resizing process.
Threaded ends fit the RCBS accessory handle (sold separately)
Brush must have lube applied to the bristles to lubricate the inside of the case neck
Stock Out
RCBS Case Lube-2 is an ideal lubricant for reloaders who prefer to use a lube pad or lube die for lubricating cases before resizing them.
Technical Information:
Material: Water Soluble, Non-toxic
Container: Plastic Gallon Jug
Features:
No sticky residue
Stock Out
The RCBS Case Lube pad is an ideal tool for reloaders looking to lube cases by rolling them over a pad. Simply charge the pad with case lube then roll brass across the pad to place an even coat of lube on the cases. Once cases are lubed they are ready to be resized. Technical Information Function: Lube pad to apply lubrication to cases before the sizing operation Material: Sponge-like foam pad surrounded by a hard plastic case Dimensions: 7.5" x 4.5" x 0.5" Notes: After pad is well charged with Case Lube very little will need to be added...
RCBS® has improved upon even the basic plastic funnel. It features a specially designed drop tube to avoid any messy powder spills around case mouths, a non-stick, anti-static surface, and a square lip to keep the funnel from rolling around.
These factory replacement decapping units are the same that are shipped with their products so you can rest assured they will work.
Stock Out
Neck Sizer Dies resize only the neck of case just enough to snugly hold the bullet. This leaves the shoulder and body at their fire-formed dimensions which leads to longer case life and increased accuracy.
For use with bolt action rifles only. New brass must be full length sized and fired before it can be neck sized.
Set includes a neck sizer die with expander-decapping unit and a seater die with seater plug.
Shellholder sold separately.
Technical Information
Material: polished and heat treated steel
Accessories: Plastic storage case
Stock Out
A build-up of residue in primer pockets can cause misfires. A couple of twists with the RCBS® Primer Pocket Brush easily cleans out residue.
This unit features an expander rod and ball and a decapping pin. It’s used with sizing dies to de-prime the case and expand the neck in bottleneck cartridges.
Stock Out
With few twists of the Precision Mic reloaders can determine chamber headspace and bullet seating depth to 0.001 inch.
Stock Out
RCBS® Competition Dies are meant for reloading bottleneck cartridges for competitive marksmen who measure success in fractions of a millimeter. The Seater Die doesn’t crimp; it features a micrometer for super accurate bullet seating depth in increments of 0.001 inch, as well as a bullet loading window and a seating guide that ensures correct bullet alignment before and after seating. Note: Not for use with progressive reloading presses; competition dies do not require neck bushings.
Stock Out
This large ergonomic handle can be used with a wide array of RCBS® accessories.
The RCBS precision mic is an indispensable tool for safe and accurate loads that help to extend the life of brass.
The precision mic measures from the datum point on the case shoulder to the base of the cartridge giving the reloader the exact SAAMI tolerance readings.
Just a few twists of the precision mic and the chambers head space and bullet seating depth to 0.001" will be determined.
RCBS® offers a variety of decapping pins for all reloading needs.
Box of 50
Stock Out
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug.
Stock Out
Neck Sizer Dies size only the neck of case (not the shoulder or body) just enough to snugly hold the bullet which leads to increase case life and accuracy.
Technical Information
Material: Steel
Die Type: Neck sizer die (with expander-decapping unit)
Accessories: plastic storage case
