The RCBS Pow'r Pull Impact Bullet Puller features a solid one piece body and innovative 3-jaw chuck that firmly grips the case rim. Simply tap it on a solid surface as you would a hammer, and the powder and bullet drop into the main chamber for re-use. A soft cushion prevents any damage to bullet. Works with most centre-fire cartridges from the 5.7x28mm FN and 22 Hornet up through the Winchester Short Magnum and Remington Ultra Magnum family of cartridges.

The new RangeMaster 2000 high-performance electronic scale handles up to 2,000 grains with +/-0.1 grain accuracy to precisely measure powder, bullets, cases or loaded cartridges. It provides right- or left-handed operation and a wealth of big-time features. Compact size and the ability to operate on AC or DC power, make it perfect for use on the bench or at the range. The touchscreen LCD is easy to read and operate, and provides an auto shut off function to save the battery. The scale is fast and easy to calibrate with the two included calibration/check weights. This scale is designed for...

Hard-wearing plastic. Non -slip base. 30 cal reloading block

Handles a wide range of calibres. Two collets provided to fit nearly every cartridge. Designed to work with magnum size cartridges, eg. 338 Lapua Cushioned handle for greater comfort and control. Constructed from tough, shatter proof plastic with aluminium handle.    

The original and world's most popular hand-held priming tool. Fast and economical hand held priming with unmatched feel and accuracy. Lee New Auto Prime uses inexpensive Lee Hand Prime shell holders only. Ships with 1 folding primer tray, 1 small and 1 large adapter. Includes a FREE molded storage box to keep your priming tool shell holders and tool together. Molded storage box holds up to 18 shell holders.

The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions.

Winchester red anodized aluminium loading blocks are made with precision for reloaders who want their equipment at a high quality. The red reloading block is for small calibres like 223Rem, 222Rem and 204 etc. 50 11MM holes are drilled into the blocks.

Now anyone with a standard reloading press can benefit from advanced benchrest techniques. The amount of resizing provided by conventional reloading dies has  always been dictated by the manufacturing tolerances (SAAMI specifications) of the brass cartridge case itself. Reloading die  manufacturers have been forced to design the neck diameter of their dies small enough to accommodate the thinnest possible brass.This may be as much as .008" - .010" smaller than the maximum cartridge dimensions typically shown in most reloading manuals.Since the majority of cases that the reloader is likely to encounter in the field are thicker than the minimum specifications...

With few twists of the Precision Mic reloaders can determine chamber headspace and bullet seating depth to 0.001 inch.