Precisely regulating the bullet seating depth and the resulting "jump" to the rifling is widely regarded as fundamental to improved accuracy. A few thousandths of an inch change between the bullet and the rifling can make the difference between just so-so accuracy and real tack-driver performance.
The OAL (overall length) Gauge is universally acclaimed as the most accurate, easy-to-use and reliable method of obtaining that critical relationship.
Sale
The RCBS Rock Chucker Supreme press is designed to last a lifetime. The rock chucker supreme press features easy operation, ambidextrous handle as well as outstanding strength and versatility. This press is packed full of useful features that every reloader will find handy. Technical Information Press Type: Single stage Frame Material: Cast iron Frame Design: O-Frame Handle Location: Bottom right or left hand Die Size Accepted: Standard 7/8-14 threaded dies and 1.25-12 dies with bushing removed Die Bushing Accepted: Yes Die Bushing Brand Used: RCBS Spent Primer Collection System: Yes Ram Stroke: 4" Priming Feature: Priming arm, will also accept...
The RCBS Pow'r Pull Impact Bullet Puller features a solid one piece body and innovative 3-jaw chuck that firmly grips the case rim.
Simply tap it on a solid surface as you would a hammer, and the powder and bullet drop into the main chamber for re-use. A soft cushion prevents any damage to bullet.
Works with most centre-fire cartridges from the 5.7x28mm FN and 22 Hornet up through the Winchester Short Magnum and Remington Ultra Magnum family of cartridges.
Handles a wide range of calibres.
Two collets provided to fit nearly every cartridge.
Designed to work with magnum size cartridges, eg. 338 Lapua
Cushioned handle for greater comfort and control.
Constructed from tough, shatter proof plastic with aluminium handle.
The redesigned Lyman digital caliper features a high tech stainless body with a direct digital read-out. Switch back and forth from inches to millimetres with the touch of a button. Zero function allows comparison between measurements. Accurate to .001"/0.1mm. Includes storage case. The rugged stainless steel body and jaws guarantee accurate readings every time. The caliper takes four difference measurements: Inside, outside, depth and step. Perfect for machinists and tool makers.
Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made without internal parts and are intended for resizing cases which have become increasingly difficult to chamber after repeated firing. After using a body die, the case should be run through the neck die to achieve proper neck tension.
The Hornady Cam-Lock Case Trimmer features a micro-adjustable cutter that allows for change in length in increments of 1/1000" without moving the case. The one finger case cam lock secures the case in place with just a touch, another touch is all that is needed to release the case. All trim lengths are measured from the head of the cartridge. Large diameter, replaceable cutting head trims cases up to .50 calibre in diameter with a tall frame to prevent banging knuckles on the bench